Heatgen Combustion Private Limited

Ignition Cable is used for combustion applications. It is used in the automobile's ignition system.  The spark is transferred by the spark plug wire to the ignition coil to the plug.

Additional Information:

• Production Capacity: 1000m

Ignition Transformers Single pole, two pole in 25, 33 & 100% ED ratings & in 230 / 110V for different application TRE 820 / 820P, TRS 1020 / 830P High Voltage Silicone Ignition Cable 7 mm & 5 mm diameter, Copper connecting lugs & accessories

Additional Information:

• Delivery Time: Ex- Stock

We provide high voltage ignition cable wire, Transformer cables with connectors & Lugs for burners, heaters etc.

• From the simple copper wire with connector to more complex cable with carbon fiber conductor, connector and molded protections.
• The high voltage ignition cables with resistive conductor in carbon fiber and semi conductive rubber are used for shielding electromagnetic disturbances.
• These high voltage ignition cable cores are recommended for use for inside wiring in the case of raised ambient temperatures under sufficient ventilation and small mechanical stress.
• It’s UV–Ultra Violet weather resistant but should be used in outside areas only with mechanical protection.

Additional Information:

• Delivery Time: Within 1-2week

A photocell or photoresistor is a sensor that changes its resistance when light shines on it. The resistance generated varies depending on the light striking at his surface. A high intensity of light incident on the surface will cause a lower resistance, whereas a lower intensity of light will cause higher resistance.