Heatgen Combustion Private Limited

BENTONE B30 Oil Burner

Available in versions up to 17,0 kg/h in 1-stage and 2-stage versions. Hydraulic adjustment of the nozzle assembly is optional on the 2-stage models. Quiet in operation.A soft pulsation free start. A wide adjustment range and high efficiency ensure the lowest possible energy consumption.

• Energy-saving and compatible with environmental requirements.
•  Quiet in operation and designed for easy maintenance.
•  Reliable and trouble-free.
•  Designed and approved in accordance with the European standard EN 267.
•  Compact design.
•  Industry-standard components are easily available.
• The removal of one securing screw allows access to all internal components.

Additional Information:

• Delivery Time: WITHIN 1-2WEEK

BENTONE Multi Fuel Oil Burner

The Multi Fuel Burner range consists of B40 and B45 which are designed for oils with higher viscosity. For example, pure rapeseed oil and other types of bio oils and fossil oils. The burner is designed to manage oil with a viscosity of 120 cst at 20 Degree C.

• Suitable for oils with higher viscosity of both fossil and biological origin.
• Equipped with pre-heater and components suitable for corrosive oils.
• Designed and approved by the European standard EN 267 together with rapeseed oil according to DIN 51605.
• Designed for easy regulation and maintenance.
• Suitable for High Resistance Boilers.
• The removal of one securing screw allows access to all internal components.
• Plug-in contact facilitates the installation.

Additional Information:

• Delivery Time: within 1-2 week

BENTONE 2 Stage Oil Burner

Available in versions up to 99,0 kg/h in 1-stage and 2-stage versions. Hydraulic adjustment of the nozzle assembly is optional. Quiet in operation. A soft pulsation free start. Wide adjustment range, high efficiency with constant combustion values. Energy saving.

• Energy-saving and compatible with environmental requirements.
•  Quiet in operation and designed for easy maintenance.
•  Reliable and trouble-free.
• IP 54 Protection as standard.
•  Designed and approved in accordance with the European standard EN 267.
•  Compact design.
•  Industry-standard components are easily available.
• The removal of one securing screw allows access to all internal components.

Additional Information:

• Delivery Time: within 1 to 2 week

Weishaupt WK type industrial burners were developed to meet special industrial and commercial requirements. The burners are suited for operation with or without preheated combustion air as required. Very high flue gas temperatures occur on many industrial processes (e.g. thermal fluid boilers) due to the high media temperatures. A considerable amount of energy can be recovered from the hot flue gases by using a heat exchanger in the flue gas system to recover the heat. This technology can result in improvements in Efficiency of up to 8%.

The burners alter their capacity proportionally, depending on the heat requirement. Depending on the type of control the burner is either.